> For the complete documentation index, see [llms.txt](https://docs.foodcore.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.foodcore.io/food-safety-and-compliance-core/daily-due-diligence.md).

# Daily Due Diligence

{% hint style="info" %}
📦 Available on **FoodCore Core**. [Upgrade your plan](https://docs.foodcore.io/getting-started/essentials-vs-core.md) to access this feature.
{% endhint %}

{% hint style="warning" %}
FoodCore helps you organise and manage the information you need, but you should always check official guidance or speak to your local authority if unsure.
{% endhint %}

Daily due diligence is the backbone of kitchen food safety — the morning fridge check, the closing clean sign-off, the delivery temperature log. Done consistently, these records are the evidence that shows an inspector (and yourself) that your kitchen is running safely every single day. FoodCore turns this into a straightforward digital flow that takes less time than filling in a paper sheet and keeps every record permanently searchable.

## Understand the calendar

When you open **Food Safety → Due Diligence**, you see a monthly calendar. Each day is colour-coded so you can read your kitchen's safety status at a glance:

* **Green** — all checks for that day were completed and every check passed
* **Amber** — a check session was started but not all checks were completed, or no session was run at all
* **Red** — at least one check in the day's session was flagged (a check failed its criteria)
* **No colour** — no checks recorded for that day

Tap any day to open a **day detail panel** showing a summary of every session run that day — which template was used, who submitted it, and how many checks passed or failed. From the detail panel you can also start a new session for that day.

## Run a check session

1. Go to **Food Safety → Due Diligence**
2. **Tap the date** you want to check (today or a past date — see Retrospective entry below)
3. Tap **Start Check**
4. **Choose a template:**
   * **Opening** — morning fridge and freezer temperatures plus any custom opening checks you've configured
   * **Closing** — end-of-day cleaning sign-off and checks
   * **Delivery** — supplier delivery temperature and condition checks
   * **Custom** — any template you've built yourself (see Custom templates below)
5. Work through each check one by one:
   * **Yes/No checks** — tap Yes or No
   * **Temperature checks** — type in the reading in °C
   * **Text checks** — type a short note (e.g. "cleaned with X product, rinsed")
   * **Signature checks** — sign in the box with your finger or stylus
6. If a check fails its criteria — a fridge is too warm, a yes/no is answered "no" when it should be "yes" — FoodCore marks it as **flagged**
7. Tap **Submit** when all checks are complete

That's it. The session is saved, the calendar updates immediately, and if anything was flagged a corrective action is automatically raised and waiting for you in [Corrective Actions](https://docs.foodcore.io/food-safety-and-compliance-core/corrective-actions.md).

## Enter checks for a past day

If you completed your checks on paper during a busy service, or you need to backfill records from a previous day, FoodCore lets you enter sessions against any past date.

1. **Tap the past date** on the calendar
2. An **amber banner** appears in the day detail panel to indicate this is a historical entry
3. Tap **Start Check** and work through the flow as normal — choose your template and record each check
4. Tap **Submit**

FoodCore saves the session against the **selected calendar date**, not today's date, so your audit trail stays accurate. This is particularly useful for staff who run paper checks during a busy opening and enter them digitally once service has settled.

## How storage units affect Opening checks

If you've set up your fridges and freezers in [Food Safety Settings](https://docs.foodcore.io/food-safety-and-compliance-core/settings.md), FoodCore automatically generates a separate temperature check row for each unit in your Opening template. So if you have a "Main Fridge", a "Display Fridge", and a "Walk-in Freezer", you'll see a named temperature check for each one — no ambiguity, no guessing.

If you haven't configured any storage units yet, FoodCore falls back to a generic "Fridge temperature" and "Freezer temperature" check. Head to [Settings](https://docs.foodcore.io/food-safety-and-compliance-core/settings.md) to set up your actual units and get checks that match your kitchen layout.

## What happens when a check fails

When you mark a check as failed — answering "No" to a yes/no question, or entering a temperature outside the safe range — FoodCore flags that check and, on submission, automatically raises a corrective action. The day turns red on the calendar so it's easy to spot.

Head to [Corrective Actions](https://docs.foodcore.io/food-safety-and-compliance-core/corrective-actions.md) to log what you did to address it and mark it as resolved. Inspectors expect to see that breaches were identified and dealt with, so a resolved corrective action is a good thing — it shows your system is working.

## Custom templates

The built-in Opening, Closing, and Delivery templates cover what most small kitchens need. You can also create your own templates for specific processes — a weekly deep-clean sign-off, an allergen cross-contact check before a custom order, or a waste disposal record.

To create a custom template, go to **Food Safety → Settings → Check templates** and tap **New template**. Add check items one by one, selecting the type (Yes/No, temperature, text, or signature) for each. Your template will then appear in the template picker when you start a session.

## View DDD history

To see a complete, filterable log of all past check sessions — searchable by date, template, or outcome — go to **Food Safety → DDD History**. You can filter down to flagged sessions quickly before an inspection, and bulk-delete old sessions if needed.

## What's next

* [Corrective Actions](https://docs.foodcore.io/food-safety-and-compliance-core/corrective-actions.md) — see what happens when a check fails and how to resolve it
* [Food Safety Settings](https://docs.foodcore.io/food-safety-and-compliance-core/settings.md) — configure storage units so your Opening checks match your kitchen
* [Preparing for an Inspection](https://docs.foodcore.io/food-safety-and-compliance-core/inspection-prep.md) — use your DDD calendar as inspection evidence
* [Export](https://docs.foodcore.io/food-safety-and-compliance-core/export.md) — download a dated PDF of all your DDD sessions
