> For the complete documentation index, see [llms.txt](https://docs.foodcore.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.foodcore.io/food-safety-and-compliance-core/haccp.md).

# HACCP plans

{% hint style="info" %}
📦 Available on **FoodCore Core**. [Upgrade your plan](https://docs.foodcore.io/getting-started/essentials-vs-core.md) to access this feature.
{% endhint %}

{% hint style="warning" %}
FoodCore helps you organise and manage the information you need, but you should always check official guidance or speak to your local authority if unsure. The Food Standards Agency publishes free HACCP guidance for small businesses at [food.gov.uk](https://www.food.gov.uk).
{% endhint %}

A HACCP plan is a systematic, documented analysis of the hazards in your food production process and the controls you have in place to manage them. For most food businesses in the UK, having food safety management procedures based on HACCP principles is a legal requirement under EU Regulation 852/2004 (retained in UK law). FoodCore's HACCP builder gives you a structured way to create and maintain this documentation digitally, so it's always up to date and always ready to show an inspector.

If you're new to HACCP, the Food Standards Agency publishes clear, free guidance for small businesses — search for "FSA HACCP guide" at [food.gov.uk](https://www.food.gov.uk) before you start.

## Understand the structure

A HACCP plan in FoodCore is built in layers:

* **Plan** — the top-level document with a name and scope (e.g. "Gluten-free bakery production")
* **Process steps** — the stages your food goes through from delivery of raw ingredients to the finished product reaching the customer
* **Hazards** — the biological, chemical, and physical risks associated with each step
* **Critical Control Points (CCPs)** — the specific steps where a control measure is essential to prevent or eliminate a significant hazard
* **CCP details** — the critical limit, monitoring method, corrective action, and verification procedure for each CCP

## Create a new plan

1. Go to **Food Safety → HACCP Plans**
2. Tap **+ New Plan**
3. **Enter a name** — be specific, e.g. "Gluten-free traybake production" or "Hot food service — soups and savouries"
4. **Enter the scope** — a brief description of what the plan covers (products, processes, and any relevant sites)
5. Tap **Save** to create the plan

You can have multiple plans — for example, one for baked goods production and a separate one for a delivery or market stall operation.

## Add process steps

Process steps are the stages your food goes through. Start from the very beginning and work through to the end of the process. Typical steps for a small food producer might include:

* **Receiving** — intake of raw ingredients from suppliers
* **Storage** — chilled, frozen, and ambient storage
* **Preparation** — weighing, mixing, cutting, portioning
* **Cooking or baking** — applying heat
* **Cooling** — bringing cooked products down to safe storage temperature
* **Packaging** — wrapping, labelling, and sealing
* **Storage (finished product)** — holding before sale or dispatch
* **Serving or dispatch** — the point at which product reaches the customer

To add a step, open your plan and tap **+ Add Step**. Give each step a clear name and a brief description of what happens at that stage.

## Analyse hazards at each step

For each process step, record the hazards that could occur. FoodCore organises hazards into three categories:

* **Biological** — bacteria (Salmonella, Listeria, E. coli), viruses, moulds
* **Chemical** — cleaning chemical residues, allergen cross-contamination, pesticide residues
* **Physical** — foreign bodies such as glass, metal fragments, packaging material, or bone

For each hazard, record the likelihood that it could occur at this step and the severity if it did — this analysis helps you decide whether the step needs to be a CCP.

Tap **+ Add Hazard** within a step to record each one.

## Identify Critical Control Points

A Critical Control Point is a step in your process where a control measure can be applied and is essential to prevent or reduce a food safety hazard to an acceptable level. Not every step will be a CCP — cooking is almost always one, for example, but a packaging step might not be.

When adding or editing a hazard, toggle **This is a Critical Control Point** if the step meets the criteria. FoodCore will then prompt you to fill in the CCP details.

## Complete the CCP details

For each CCP, record the following:

* **Control measure** — what you do to control the hazard (e.g. "Cook to a core temperature of 75°C")
* **Critical limit** — the measurable value that separates safe from unsafe (e.g. "Core temperature ≥ 75°C for at least 2 minutes")
* **Monitoring method** — how you check that the critical limit is being met (e.g. "Probe thermometer inserted into the thickest part of the product")
* **Monitoring frequency** — how often you check (e.g. "Every batch")
* **Corrective action** — what you do if the limit is breached (e.g. "Return to oven and re-check temperature; discard if unable to reach safe temperature")
* **Verification** — how you confirm the monitoring is working (e.g. "Calibration check on probe thermometer every three months")
* **Responsible person** — who is accountable for this CCP

Tap **Save** after completing each CCP.

## Keep your plan current

A HACCP plan should be a living document, not something you write once and file away. Review it and update it whenever:

* You introduce a new product or a significant recipe change
* You change a supplier or a key ingredient
* You add or remove equipment
* A food safety incident or near-miss occurs
* At least once a year as a routine review

To edit your plan, open it and tap **Edit**. Update the relevant steps, hazards, or CCP details, and note the review date. FoodCore's export captures your plan as it stands at the time of export, so a PDF generated before and after a review will reflect the changes.

## Link monitoring records to CCPs

Once your CCPs are defined, you can log ongoing temperature and other measurements against them in [Monitoring Records](https://docs.foodcore.io/food-safety-and-compliance-core/monitoring-records.md). This connects your day-to-day records directly to your documented HACCP plan and gives you a clear audit trail showing that you're actively monitoring the controls you've identified.

## What's next

* [Monitoring Records](https://docs.foodcore.io/food-safety-and-compliance-core/monitoring-records.md) — log ongoing measurements against your CCPs
* [Corrective Actions](https://docs.foodcore.io/food-safety-and-compliance-core/corrective-actions.md) — record and resolve breaches of your critical limits
* [Preparing for an Inspection](https://docs.foodcore.io/food-safety-and-compliance-core/inspection-prep.md) — make sure your HACCP plan is current before an EHO visit
