> For the complete documentation index, see [llms.txt](https://docs.foodcore.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.foodcore.io/food-safety-and-compliance-core/inspection-prep.md).

# Prepare for an EHO inspection

{% hint style="info" %}
📦 Available on **FoodCore Core**. [Upgrade your plan](https://docs.foodcore.io/getting-started/essentials-vs-core.md) to access this feature.
{% endhint %}

{% hint style="warning" %}
FoodCore helps you organise and manage the information you need, but you should always check official guidance or speak to your local authority if unsure. For official guidance on food hygiene inspections, visit [food.gov.uk](https://www.food.gov.uk) or contact your local Environmental Health department.
{% endhint %}

A food hygiene inspection from your local Environmental Health Officer (EHO) doesn't have to be stressful. The best preparation is the same as good day-to-day food safety practice: keep your records up to date, resolve issues when they arise, and know where everything is. If you've been using FoodCore consistently, most of the hard work is already done.

This guide walks you through what inspectors typically look for and how to use FoodCore to make sure you're ready.

## What inspectors typically review

EHOs assess three main areas during a routine inspection. Understanding each one helps you focus your preparation.

### Food hygiene and safety

Inspectors look at how you handle, store, prepare, and cook food. They'll check that your temperatures are correct — both storage temperatures (fridges at or below 8°C, freezers at or below -18°C) and cooking temperatures (typically 70°C core for two minutes, or equivalent). They'll also look for signs of cross-contamination risks, particularly around allergens.

**In FoodCore:** your Daily Due Diligence calendar and Monitoring Records provide the documented evidence that you're checking and recording temperatures consistently.

### Structural and cleanliness standards

Inspectors check the physical condition of your kitchen — cleanliness of surfaces and equipment, waste management, pest control, and the condition of walls, floors, and fixtures. Your cleaning schedule and pest control contract are key documents here.

**In FoodCore:** your PRPs section holds your cleaning schedule, pest control records, and any other maintenance documentation.

### Confidence in management

This is the area where good record-keeping makes the biggest difference. An inspector is looking for evidence that you understand food safety, that you have a documented system, and that you follow it. A coherent HACCP plan, consistent DDD records, and resolved corrective actions all demonstrate that your management system is working.

**In FoodCore:** your HACCP plan, DDD calendar, corrective actions register, and PRPs together make up this evidence.

## Pre-inspection checklist

Work through this list before your inspection — or make it a monthly habit so you're always ready.

### 1. Check your DDD calendar is up to date

Open **Food Safety → Due Diligence** and look at the past three months. Any amber days (incomplete checks) should have a note or explanation. Consistent green days with the occasional resolved red day show exactly what a good food safety system looks like.

If there are gaps, you can still enter retrospective sessions for past dates — see [Daily Due Diligence](https://docs.foodcore.io/food-safety-and-compliance-core/daily-due-diligence.md).

### 2. Confirm your HACCP plan is current

Open **Food Safety → HACCP Plans** and check that your active plan reflects how you actually work today. If you've added new products, changed a supplier, or altered a process step since you last reviewed it, update the plan now. Date your review so there's a clear record that it was checked.

See [HACCP Plans](https://docs.foodcore.io/food-safety-and-compliance-core/haccp.md) for how to edit and update your plan.

### 3. Check monitoring records for the past three months

Open **Food Safety → Monitoring Records** and scan for any flagged records without a linked, resolved corrective action. Inspectors expect to see that out-of-range readings were identified and dealt with — not that they never happen, but that you have a system for catching and resolving them.

### 4. Resolve or progress all open corrective actions

Open **Food Safety → Corrective Actions** and filter by **Open**. Every open action should either be resolved with a resolution note, or have a clear progress note explaining what's being done. An EHO seeing a corrective action from three months ago with no resolution is a red flag. An EHO seeing it resolved with a clear explanation is evidence that your system works.

See [Corrective Actions](https://docs.foodcore.io/food-safety-and-compliance-core/corrective-actions.md) for how to resolve actions.

### 5. Review your PRPs

Open **Food Safety → Prerequisite Programmes** and check that the following are current:

* **Cleaning schedule** — when was it last reviewed? Does it reflect your current kitchen layout and equipment?
* **Pest control** — do you have a current contract or inspection report?
* **Staff training records** — does every person handling food have an up-to-date food hygiene certificate on file?
* **Equipment calibration records** — is your probe thermometer calibrated and is there a record of it?
* **Supplier approvals** — do you have documented checks for your key suppliers?

See [Prerequisite Programmes](https://docs.foodcore.io/food-safety-and-compliance-core/prp.md) for how to update these.

### 6. Check your storage unit settings

Open **Food Safety → Settings** and confirm that all your fridges and freezers are listed with the correct temperature thresholds. If you've added or removed equipment since you last updated this, amend it now. Accurate settings mean your DDD temperature checks are flagging the right values.

## Export your records for the inspector

Once you're satisfied that everything is in order, generate a full PDF report to hand to the inspector (or to have ready on your device):

1. Go to **Food Safety → Export**
2. **Tick all sections** — HACCP Plans, Daily Due Diligence, Monitoring Records, Corrective Actions, Prerequisite Programmes
3. **Set the date range** — typically the past 12 months, or as far back as you've been using FoodCore
4. Tap **Export PDF**

The PDF includes your business name, the date it was generated, and the date range covered. Print it or keep it on your phone — either way, you can put everything in front of the inspector in seconds.

See [Export](https://docs.foodcore.io/food-safety-and-compliance-core/export.md) for more detail.

## A note on official guidance

FoodCore is a tool to help you organise your food safety management. The Food Standards Agency (FSA) publishes free, authoritative guidance for small businesses — search for "FSA HACCP guide" or visit [food.gov.uk](https://www.food.gov.uk) for templates, advice, and guidance on what's legally required for your type of business. Your local Environmental Health team can also advise on anything specific to your premises.

## What's next

* [Daily Due Diligence](https://docs.foodcore.io/food-safety-and-compliance-core/daily-due-diligence.md) — keep your daily checks consistent
* [Export](https://docs.foodcore.io/food-safety-and-compliance-core/export.md) — generate your inspection PDF
* [HACCP Plans](https://docs.foodcore.io/food-safety-and-compliance-core/haccp.md) — keep your HACCP documentation current
* [Corrective Actions](https://docs.foodcore.io/food-safety-and-compliance-core/corrective-actions.md) — resolve open breaches before your inspection
* [Prerequisite Programmes](https://docs.foodcore.io/food-safety-and-compliance-core/prp.md) — check your cleaning, training, and pest control records
