> For the complete documentation index, see [llms.txt](https://docs.foodcore.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.foodcore.io/food-safety-and-compliance-core/settings.md).

# Storage units & temperature settings

{% hint style="info" %}
📦 Available on **FoodCore Core**. [Upgrade your plan](https://docs.foodcore.io/getting-started/essentials-vs-core.md) to access this feature.
{% endhint %}

Before you start running daily checks, spend a few minutes configuring your Food Safety Settings. Getting this right means your Daily Due Diligence Opening checks will be tailored to the actual fridges and freezers in your kitchen, and your monitoring records will automatically flag readings that fall outside safe limits.

## Storage units

Storage units are the individual fridges and freezers in your kitchen. When you configure them here, FoodCore generates a dedicated temperature check row for each one in your Opening DDD template — labelled with the unit's name, so there's no ambiguity about which fridge a reading refers to.

{% hint style="info" %}
If you don't configure any storage units, FoodCore defaults to generic "Fridge temperature" and "Freezer temperature" check rows in your Opening template. These work fine to get started, but named units give you much cleaner records.
{% endhint %}

### Add a storage unit

1. Go to **Food Safety → Settings → Storage Units**
2. Tap **+ Add Unit**
3. **Enter a name** — use whatever you call it in your kitchen, e.g. "Main prep fridge", "Display fridge", "Walk-in freezer", "Counter-top display"
4. **Select the type** — Fridge or Freezer
5. **Set temperature thresholds** — enter the minimum and maximum safe temperatures for this unit. Typical targets are:
   * Fridges: 1°C to 8°C (ideally keeping below 5°C)
   * Freezers: -24°C to -18°C (alarm at above -18°C)
6. Tap **Save**

Repeat for every unit in your premises. When you next open an Opening check session in Daily Due Diligence, you'll see a temperature check row for each unit you've configured.

### Edit or remove a unit

To rename a unit or change its type or thresholds, open **Food Safety → Settings → Storage Units** and tap **Edit** next to the unit. Update the details and tap **Save**.

To remove a unit, tap **Delete**. Removing a unit from settings does not delete any historical temperature records that were already logged against it — your audit trail stays intact.

## Process temperature thresholds

Process temperature thresholds define the critical limits for your cooking and other process steps. These feed into your Monitoring Records — when you log a temperature reading and select a threshold, FoodCore automatically determines whether the reading passes or fails.

Common thresholds for a small food business:

| Process                        | Typical critical limit                |
| ------------------------------ | ------------------------------------- |
| Cooked meat and poultry (core) | ≥ 75°C (or 70°C for 2 minutes)        |
| Reheated food (core)           | ≥ 75°C                                |
| Chilled storage                | ≤ 8°C (ideally ≤ 5°C)                 |
| Frozen storage                 | ≤ -18°C                               |
| Cooling (2-hour rule)          | From 70°C to below 8°C within 2 hours |

To add a threshold:

1. Under **Process Temperatures**, tap **+ Add Threshold**
2. **Enter a name** — e.g. "Cooked product core temperature", "Cooling — to fridge within 2 hours"
3. **Set the minimum and/or maximum safe value** in °C
4. Tap **Save**

When you log a monitoring record and select this threshold, FoodCore will compare your entered reading against the limits and suggest a pass or fail result.

## Check templates

You can create custom check templates for processes that aren't covered by the built-in Opening, Closing, and Delivery templates. Each template can include any combination of check types: Yes/No, temperature, text, and signature.

1. Under **Check templates**, tap **+ New Template**
2. **Enter a name** for the template — e.g. "Weekly deep clean", "Allergen risk check — custom order", "Delivery — ambient goods"
3. **Add check items** one by one, selecting the type for each and writing the check question
4. Tap **Save**

Your template will appear in the template picker when starting a new session in Daily Due Diligence.

## What's next

* [Daily Due Diligence](https://docs.foodcore.io/food-safety-and-compliance-core/daily-due-diligence.md) — run your Opening checks with your storage units configured
* [Monitoring Records](https://docs.foodcore.io/food-safety-and-compliance-core/monitoring-records.md) — use your process temperature thresholds to log pass/fail readings
