> For the complete documentation index, see [llms.txt](https://docs.foodcore.io/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.foodcore.io/labels/print-sheet.md).

# Printing a sheet of labels

If you're printing on a sheet of pre-cut sticker labels — Avery or otherwise — rather than one label at a time, use **Print Sheet** instead of the single-label print option. It lays your design out across the whole sheet and gets the sizing right automatically.

## Choose a layout

Go to **Labels** and **click** **Print Sheet**.

**Choose** one of the five Avery presets, or **set a custom grid** if you're using sticker stock from a different supplier — number of columns and rows, the gap between stickers, and the sheet margins.

All five Avery presets use Avery's own published dimensions, centred on A4 to within 0.02mm, so geometry is very rarely the reason a print comes out misaligned — see the Chrome scaling point below before assuming the layout is wrong.

## On a sheet, the sticker size IS the label size

This is the key difference from single-label printing: **when you print a sheet, each sticker is sized to exactly fill its cell on that sheet** — not to whatever size you last set in the toolbar.

The toolbar's Label size setting applies to **single-label printing only**. If the size you've set there doesn't match the sticker size for the sheet you've chosen, an **amber notice tells you so** before you print, so you're never caught out by the two disagreeing.

## The number one printing problem: Chrome shrinks the page

By far the most common reason a sheet print looks "off" — labels drifting off the die-cut, worse the further out from the centre — is Chrome's own print dialog quietly rescaling the page.

**What's happening:** Chrome's built-in PDF viewer usually defaults to **"Fit to printable area"**, which scales the whole sheet down by roughly 4% and re-centres it. Every label shifts slightly toward the middle of the page as a result — barely noticeable near the centre of the sheet, much more obvious at the edges.

**The fix:** in the print dialog, set **Scale** to **100%** (sometimes labelled **"Actual size"**). Do this every time you print a sheet — it's a per-print-job setting, not something that stays changed.

{% hint style="warning" %}
Chrome shows **no Margins option** when printing a PDF — that setting only appears when printing a web page directly, not a PDF file. If you've been told to set "Margins: None" for a sheet print, that instruction doesn't apply here. **Scale** is the only setting that matters for a PDF sheet print.
{% endhint %}

## Use the print alignment test

Next to **Print Sheet** is **Print alignment test**. Use it before committing a full sheet of stickers to a misaligned print run.

**Click** it and FoodCore prints a diagnostic page showing:

* The **cell grid** for your chosen layout
* **Corner crosshairs** at each cell
* A **100mm ruler**, printed both horizontally and vertically

Hold this against a ruler (or measure the printed ruler itself) and check two things:

* **If the printed 100mm ruler measures under 100mm**, your printer is scaling the page — go back and set **Scale to 100%** as above.
* **If the ruler measures correctly but the crosshairs land off the die-cut lines on your sticker sheet**, the ruler confirms scaling isn't the issue — instead, **nudge the per-preset margin setting** for that sheet layout slightly until the crosshairs line up, then reprint the test to confirm.

## What's next

* [Prep / shelf-life day dot labels](https://docs.foodcore.io/labels/date-labels.md)
* [Troubleshoot label issues](https://docs.foodcore.io/labels/troubleshooting.md)
* [Export options: PDF, PNG, JPG, print queue](https://docs.foodcore.io/labels/export.md)
* [All available label blocks](https://docs.foodcore.io/labels/blocks.md)
